Style Switcher

Layout options
  • Boxed Layout
  • Full Width Layout
Primary Color

SUB ARC WIRESub arc wire
 
S2 Sizes: 2.4MM, 3.2MM, 4.0MM, 5.0MM
M12 K Sizes: 2.4mm, 3.2mm, 4.0mm, 4.8mm
SUB ARC FLUX

S-777MX - Especially insensitive to oil, rust, scale, dirt and primers on the surface to be welded. Slag detachability in narrow groove and resistance to porosity are excellent. Suitable for welding of thin and medium plate in high speed welding. As the consumption of flux is low, it is very economical. Applicable to horizontal and flat fillet welding.

 

S-777MXH - Especially insensitive to oil, rust, scale, dirt and primers on the surface to be welded. Slag detachability in narrow groove and resistance to porosity are excellent. As the consumption of flux is low, it is very economical. Applicable to horizontal and flat fillet welding.

 

S-717 - Good weldability for all range of thickness of plate. Excellent impact value and crack-resistibility of welded metal. Inactive type flux is not affected by welding parameter, especially suitable for multilayer welding of thick plate.

SuperFlux 300S - Bonded type-flux containing appropriate contents of alloying element and weld metal contains proper contents of ferrite phase. Excellent resistance to crack, mechanical property and corrosion. Excellent weldability such as stable arc and easy slag removal. Good bead appearance, high welding efficiency in welding thin plate up to ultra-thick plate

FLUX CORED WIREFlux cored wire

SF-71 is a titania type flux cored wire for all position welding with CO₂. Compared with solid wire, spatter loss is low, bead appearance is beautiful and arc is soft with good stability. Slag covering is uniform with good removal.

Sizes: 1.2mm, 1.6mm
SuperCored 71 is a flux cored wire which has been designed to get a good usability in all position for wide range of welding currents. With its quiet and smooth arc, its slag detachability is very good. Sizes: 1.2mm, 1.6mm
 
SuperCored 81K2 is a titania type flux cored wire designed for all position welding with CO₂ shielding gas. Sizes: 1.2mm, 1.6mm
 
SuperCored 81 is a titania type flux cored wire to be used with Ar+CO₂gas mixture shielding. This provides excellent notch toughness at low temperature, not only as-welded but also stress relieved state. Sizes: 1.2mm
 
SuperShield 11 is an all position self-shielded flux cored wire designed for single & multi-pass welding of thin mild and medium tensile steels not exceeding 510MPa. Sizes: 1.2mm, 1.6mm
SuperShield CrCw - Use on wear plate (Raw material transfer and storage tank : Cr-Carbide type) Sizes: 1.6mm
 
SW-2209 Cored is a titania type flux cored wire for all position welding with CO₂& Mixed gas. As deposition rate is higher than solid wire and MMA electrode highly efficient welding can be performed.  Sizes: 1.2mm
 
SC-110M Cored is a metal cored wire which provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage. Sizes: 1.2mm
Fuxofil 58 (HRC58) Sizes: 1.2mm, 95.23
STAINLESS STEEL FLUX CORE WIRE
 
SW-308L Cored is a flux cored wire for all position welding to be used with CO₂or Argon +CO₂ mixed shielding gases. This wire benefits from a fast freezing slag system which assists the operator when welding out of position and performs equally as well when welding in the flat and horizontal position.Sixes: 1.2mm
 
SW-309L Cored is a flux cored wire for all position welding to be used with CO₂or Argon + CO₂ mixed shielding gases. This wire contains a high ferrite level in its austenitic structure thus providing better weldability together superior heat and corrosion resistance. As larger amounts of alloying elements are added, it becomes suitable for the welding of dissimilar joints where dilution from ferrite steel takes place. Sizes:1.2mm, 1.6mm
 
SW-316L Cored is a flux cored wire for all position welding to be used with CO₂or Argon + CO₂ mixed shielding gases.  Due to ferrite contents in the weld metals austenitic structure, it has excellent crack resistance. Sizes: 1.2mm
 
METAL CORED WIRE

SuperCored 70NS is a metal-cored wire which combines the high deposition rates of F.C.W with the high efficiencies of a solid wire, provides exceptionally smooth and stable arc, low spatter and minimal slag coverage. Sizes: 1.2mm, 1.6mm

 
 
 

زیر مجموعه ها

طراحی شده توسط سعید بزرگ زاده