Standards

E Fe1	TS EN 14700
E Fe1	EN 14700
E 1-UM-250	DIN 8555

Chemical Composition of Weld Metal % (Typical)

C	Si	Mn	Cr
0,15	0,8	1,0	1,0

Typical Base Material Grades

• For tough builds up on rails, gearwheels, shafts, gear parts and couplings,
• For buffer layers on carbon steels and low-alloyed steels with concurrent extreme compressive stress on anti -wear surfaces.
• Preheat heavy parts and higher carbon steel qualities. Re-drying : 300°C / 2h

Features and Applications

• Suitable for impact resistance.
• Suitability of alloy types for different kind of requirements; 1) Mechanical friction is acceptable and non accetable. Mechanical impact is excellent and good. 2) thermal high temperature and thermal termo shock and corrosive are not acceptable. 3) crack resistance and machining are excellent. 4) Ferritic alloyed and martensitic microstructured. 5) Hardness ranges are 150 to 450 HB
• Examples of applications; 1) System structures are solid to solid and boundry friction.
• a) Type of wear is frictional. i) Examples of components are Guiding way, sliding rail.
• b) Type of wear is impact wear. ii) Examples of components are valve rocker, cam.
• c) Type of wears are rolling and friction. iii) Examples of components are Bogie wheel and track rails.

Mechanical Properties

Current Type

• AC
• DC(+)
  

  Operating Data

  Product Code	Diametré x Length (mm)	Diameter x Length (inch)	Welding Current (A)	Weight g / 100 pcs
  3010101744	Ø3,2 x 350	Ø1/8 x 14	100 - 140	3670
  3010101747	Ø4,0 x 450	Ø5/32 x 18	140 - 180	6820
  3010101750	Ø5,0 x 450	Ø3/16 x 18	180 - 230	10570